BOSS DOH Hanger gir deg bedre justeringsmuligheter til ditt kydexhylster.
Man har mange justeringsmuligheter med denne hengeren.
Den er også meget stabil tross sine justeringsmuligheter.
Fungerer både til høyre og venstre hendte.
Vi har standard varianten på lager.
Det er kun henger. Selve hylster kroppen følger ikke med.
Montering:
1. Attach Y-plate to holster body through three large holes on the Y-plate using short round-head screws
2. Attach Y-plate to slotted hanger plate using long screws and spacers (do not install lock washers yet). Screw heads should be on the rounded side of the hanger plate, one screw in a center hole and the other in the corresponding curved slot.
3. Hold belt inside belt plate cutout and install onto main hangar plate with 4 flat-head screws, solidly mounting holster and hanger to belt.
4. Test location of holster with unloaded firearm. Adjust to preferred height and tilt by changing screw positions on the main hangar plate and Y-plate. Verify position meets rule requirements
5. Mark position of long screws lightly with a pencil and then remove and re-install the long screws with a lockwasher underneath the screw heads. Apply threadlocker to all screws.
