Nå har du muligheten til å bruke din Dillon 650 eller 750 som single station presse også.
Og du kan fortsatt bruke den som en progressiv presse uten store endringer.
Om du har lys i senter på pressa kan det være mulig at det kommer i konflikt.
Medfølgene verktøyhodet skiftes like fort som vanlig hodet på 650/750.
Diene sitter i Armanov sine free float ringer, noe som gjør at de sentreres hver gang.
Det er også lett å gjøre justeringer.
Senterbolt skiftes for å gi deg enstasjons muligheten. Men, bolten kan bli sittende når du ønsker å bruke pressen som vanlig.
Følger med:
- Toolhead m/lås
- Adapter bolt m/oring
- Spent Primer Tray
- 3 stk Free Float Die Ringer
- 2.5mm Unbraco
Fra produsent:
Armanov lock rings secure the dies in place using an indexing spring plunger, allowing for quick and easy die changes by simply lifting the plunger tab. The floating action ensures precise alignment by allowing the dies to self-center over each cartridge, resulting in superior concentricity and more accurate ammunition.
The spent primer tray features a curved path to slow down and efficiently catch primers ejected with a spring-loaded decapping die, along with an overhang to prevent primers from falling off the tray, ensuring clean and reliable operation. When the tray is full, it’s simple to take it out and discard the primers, or you can pick them up with your hands.
The adapter bolt features a 19 mm hex shape for easy tightening with a wrench and is compatible with all standard shell holders. It allows for quick changes by simply moving the rubber retainer to a lower position. The sloped primer exit ensures efficient spent primer removal. Additionally, you can leave the adapter on the press at all times, and it won’t interfere with the toolhead, enabling even faster conversion.
The toolhead features an engraved scale for precise fine adjustments of the die, with increments of 0.05 mm or 0.002 inches. Simply mark a reference point on the die, then rotate it to adjust the length accurately, using the scale as a guide. The lock ring bolt is conveniently accessible from the back and can be tightened during fine adjustment to secure the die in place.
